What To Do If Your Candle Is Tunneling?

Can you melt the candle without heating it?

Knowing the melting point of your wax before heating it will give you the best results.

Never approach the flash point, as this is the temperature that the wax can combust if exposed to flame..

What temperature should I pour my soy wax?

around 135° FEach blend/brand of soy wax may have its own properties and additives that affect the pouring temperature. The industry standard is to pour around 135° F, or just as the wax starts to look slightly opaque, but some wax can be poured as high as 160-175° F.

How do you get a candle to burn evenly?

Heed the following guidelines and you’ll get way more mileage out of your favorite candles.Trim the wick. Every. … Let the wax melt all the way across. Once your candle’s lit, don’t blow it out until the top layer of wax has melted all the way across. … Buy multi-wick candles. … Keep the flame away from moving air.

What can you do with leftover candle wax?

Here’s our guide on what to do with left over candle wax:Create your very own, brand new candle!Lubricate a sticky drawer or squeaky door hinge.Get a fire going.Infuse your home with the final lingering scents.Use it for budget skating wax.Seal up shoelace frays.Seal your letters with a personal touch.More items…•

Why do homemade candles sink in the middle?

Homemade candles sink in the middle because the wax that has hardened (during the wax cooling process) cannot stick to the wick. Pouring it at a cooler temperature or a second pour may help prevent that.

Why does salt make candles burn longer?

Adding salt serves the same purpose as putting the candle in the freezer—it slows down the rate at which the wax melts, giving you a longer, more economical burn. When you use salt in addition to the freezing method, you’re doing all that can be done to squeeze extra time out of a candle.

How long do soy candles need to cure?

How to Make the Cure Process Run Smoothly. The first thing to do is just to wait before lighting the candle. Most people recommend at least 24 to 48 hours for a paraffin-based candle, and up to a week for a soy-based candle.

How can I make my candles smell stronger?

How do I get the fragrance to smell stronger?Use the recommended percentage of fragrance oil for the type of wax you’re using. … Be sure to weigh your fragrance oils on a scale, not measure in a cup or spoon.Add fragrance oil at 185Fº and stir gently and thoroughly with the melted wax. … Let your candles cure before test burning them.More items…

Why do my candles burn unevenly?

Sometimes tunneling occurs because the quality of the candle wax isn’t great, and you get a bad burn from the start. But you can also contribute to tunneling by burning your candle improperly — anything from not trimming the wick to 1/4-inch before you light it to not letting it burn long enough the first time.

What causes tunneling in candles?

Sometimes, candle tunneling is caused by a wick that isn’t large enough for the size of the candle, but more often it’s caused by the timing of the first burn. … It also makes it harder and harder to light the wick as the candle continues to burn down.

How do you stop a candle from tunneling?

To prevent tunneling, burn your candle one hour for every inch in diameter the first time you light it. Fun fact: Your candle has a memory. The wax will only melt as far as it did the first time you burned the candle.

How do you fix a candle that only burns in the middle?

Turns out aluminium foil is the key to fixing a tunneled candle quickly. Simply wrap foil around the edge of the candle, leaving a hole in the middle so that the wick can burn through properly. After a couple of hours, your wax would have melted to an evened-out level.

Why is my candle burning so fast?

If you find that your candle flames are burning too high, there are two potential causes. One potential cause is that the wick is too “thick” — a decision by the manufacturer which you can’t do much about. The other potential cause is that the wick is too long, and needs to be trimmed.

What happens if you add too much fragrance to soy wax?

If your fragrance load is too high, the flame can burn off the excess oil that was not able to bind with the wax, creating heavier-than-usual, dark smoke.