What Car Does The Ls3 Come In?

How much HP can a 5.3 LS make?

The stock 5.3L is factory rated around 320 hp with 340 lb-ft of torque..

Are 5.3 LS Motors?

The GM 5.3L engine (326.1 ci, 3.78-inch bore 3.62-inch stroke) is by far the most-produced displacement in GM’s Gen III, IV, and V family tree. There are millions of these lying around in the salvage-yard—and like all “LS”-based engines, they can produce big power even in well-used, 100,000-mile trim.

Which is better ls2 or ls3?

But, the most obvious difference between the two is the displacement. The LS2 has 6.0L of displacement, and is technically was the first Gen IV Chevrolet engine. The LS3, on the other hand, has 6.2L of displacement and is also Gen IV Chevrolet engine. … To no one’s surprise, the LS3 heads are better than the LS2 heads.

How much HP can a ls3 make?

The block can handle 850 to 1000 horsepower. However, you will want to upgrade to Head Studs and Main Studs if you plan on using boost or nitrous.

How many miles will a ls3 last?

I expect the LS3 to do as well or better. Here’s my guess, though it is only a guess: If you did nothing but warm starts and highway driving, the engine might last for 300,000 miles. Those are the same conditions that will give you max mileage on your Oil Life Indicator, about 15,000 miles for 100%.

Which LS engine is best?

If you’re planning on boosting your project the 4.8L truck engine will be perfect for you. The 4.8L can take insane amounts of boost completely stock and will really perform well. If you don’t want a barebones 5.3L or 4.8L you could always step up to a 6.2L truck block which is based on the LS3 engine.

Which is better ls3 or ls7?

LS3 is just cheaper. The LS7 has the larger bore allowing LS7 type heads. Believe you would have to sleeve a LS3 block to get 4.125 bore. LS3 can be dry sleeved to this bore where LS1 would have to get wet ones, which appear would be stronger in long run.

How much does an ls3 engine cost?

SALE PRICE: $7,861 The LS3 6.2L is the 430-hp standard engine in the Chevrolet Camaro SS and the all new RWD Chevy SS. It is a fantastic combination of high technology and uncompromising performance. Our LS3 crate engine comes complete, from the Chevy SS-specific oil pan to the ignition system.

What is the strongest LS block?

BMP claims its cast-aluminum (357-T6) LS block is, “the absolute strongest available with important improvements that even the factory race blocks don’t have.” The oiling system is priority-main, meaning that oil gets fed to the crank first and the top end last to prevent starving the main bearings of oil.

How much does it cost to rebuild a ls3?

MSRP on a new LS3 engine is $7700 @ LS3 Crate Engine. So I’m guessing parts will probably be less than $7000 plus labor.

What’s the difference between ls1 and ls3?

The LS1 and the LS3 have a lot in common. But, the most obvious difference between the two is the displacement. The LS1 has 5.7L of displacement and technically was the first Gen III Chevrolet engine. The LS3, on the other hand, has 6.2L of displacement and is a Gen IV Chevrolet engine.

What year did the ls3 come out?

2008LS3. The LS3 was introduced by Chevrolet as the standard powerplant for the 2008 (and later) Corvette.

Is the ls3 a good engine?

Consensus is the LS3 is a great engine, very stout and reliable, responds well to mods, and problems, other than water pumps, are rare. LS7 is also a great engine once you deal with the head/valve issue. Like you I’m new to the corvette world but not new to the LS3. I had one in my 2010 Camaro SS.