Question: Is 302 Better Than 351w?

How can you tell if a 351 Windsor is a 351 Cleveland?

Three Easy Visual Differences Between the 351C and 351MCleveland engines share a bellhousing bolt pattern with the Windsor family.

Due to a higher deck, the 351M’s intake manifold is wider than a 351C.Motor Mounts.351 Cleveland mounts use two bolts to attach to the engine, whereas the Modified uses three..

Can you put 351 heads on a 289?

yes, you can fit either a 351W or a 351C head on a 289/302.

How can I get more horsepower out of my 351 Windsor?

351W Performance TricksFlow: The Key to Building Horsepower. The key to making more horsepower in the 351 Windsor, or any engine, is to move more gas/air mixture through the engine. … Removing Flow Restriction. A cylinder head flows as well as its most constricted part. … Exhaust Headers. … Cylinder Head Flow. … Interchangeable Heads.

What are the best heads for a 351 Windsor?

Top-Rated Heads for 351W List:Edelbrock 5023 Cylinder Head. … Flotek 203505 Aluminum Cylinder Head for Small Block Ford. … Speedmaster PCE281.2049 As Cast Cylinder Heads. … Edelbrock 5025 Cylinder Head. … COMP Cams 35016-01 Cylinder Head Assembly. … Air Flow Research Renegade Race Aluminum Cylinder Head SBF 2 pc P/N 1456.More items…

What year 351w is best?

1969Best years From what I have read, the best year for 351W blocks are 1969, 70, and 71. For some reason these were the strongest 351W ever produced, but very hard to find.

Is 351 Cleveland better than Windsor?

The 351 Cleveland is a member of the 335 series family of Ford small-block engines. Its large ports and oversize canted valves give it more horsepower and allow it to run at a higher rpm than the Windsor. The valve covers have a twisting curve and are attached by eight bolts.

Will 351 Windsor heads fit on a 351 Cleveland?

351C heads will not work on a 351W block without drilling new water jackets in the heads. A 351C intake will not work at all on a 351 W. From what I understand, a Boss 302 intake, not a 351C intake, mind you, will work on a 302, not a 351W, with the modified 351 C heads.

How much horsepower can you get out of a 351 Cleveland?

It isn’t hard to get 400 hp from a 351C. All you need is the right combination of parts, including CNC-ported, factory, iron-head castings from Powerheads and a budget stroker kit, and get ready for great street power.

What is the difference between a Ford 302 and a Boss 302?

The Boss 302 has eight valve cover bolts; in 1969 they were chrome and in 1970 they were cast aluminum, while the standard 302 has six valve cover bolts.

How long will a 351 Windsor last?

it all depends on how hard you run it. could go up to 300,000 miles if you never run it over 3000 rpm or it could last another 50 miles if you run it at say maybe 8000 rpm.

How big can you stroke 351w?

Ford Engine Bore and Stroke ChartFord Stock Engine Bore and Stroke Guide2603.8002.8702894.0002.8703024.0003.000351W4.0003.50026 more rows•Mar 7, 2018

How much horsepower does a 351 Windsor have?

Ford 351W V-8 SpecsEngine:Ford 351W V-8 (5.8L)Peak Horsepower:• 1969 – 250 hp w/ 2 barrel carburetor, 300 hp @ 5,400 rpm w/ 4 barrel carburetor • 1972 (net power ratings adopted) – 153 hp w/ 2 barrel, 161 hp w/ 4 barrel • 1997 – 205 hp (CA version), 210 hp @ 3,600 rpm • Ford Lightning – 240 hp @ 4,200 rpm16 more rows

How much horsepower can a 351 Windsor block handle?

700 hpPretty much any 351W block should handle 700 hp, however there are a ton of factors which may kill one +/- that mark. Don’t know what you are building but maybe consider an SHP block if you are getting into that power neighborhood and adding spray.

Why is a 327 better than a 350?

A 327 with it’s shorter stroke would need shorter gears so it can GET to its revs, where a 350, with its slightly longer stroke and more torque output will pull a little taller gear than the 327 will.

What is the difference between 302 and 351w?

On a 302 (or smaller c.i.d.) blocks, the distributor mount is almost flush with the top of the block (where the intake sits). … A 351W block is taller. So, the distributor mount is below the block surface where the intake sits. There is also more space between the water passages and the cylinder heads.

Will 302 heads fit on a 351 Windsor?

For the most part 302 heads and 351W heads are the same. Different years can have different combustion chamber sizes but ffor the most part there will be no performance increases by going with 302 heads. Plus you will need to drill all the head bolt holes out as the 351W uses larger head bolts.

Is the 351w a good engine?

the 351w is a very good engine, it can handle a lot of power before the block splits, that usually happens at around 800hp. the 351m is an ok engine, good for use in trucks and for the basis of building a good 400. the 351c on the other hand is tough to beat, even by the chevy 350.

What’s the best Ford engine?

3.5-Liter Ecoboost®: The base engine on the Ford F-150, the 3.5L Ecoboost® has impressive power ratings of 375 horsepower, delivers the best-in-class 470 lb. -ft. of torque, as well as the best-in-class tow ratings.

What is the best carburetor for a 351 Windsor?

The Best Carburetors for 351 Windsor ReviewsMophorn FORD0002YF — Carburetor Heavy Duty 2100 2 Barrel Carburettor.A-Team Performance Ford 2100,A800 — 154 2-BARREL CARBURETOR 2100.AutoHorizon AAUSME000320 — 2 Two Barrel Carburetor 2100 For Ford 351.AUXMART 70018229 — Carburetor New 2100.More items…

Which 351w block is best?

pb_paulie_b. The 69′ block is the strongest stock 351w block. High nickle content and thicker main webbing. It is also flat at the top of the main webbing.